EPO SEAL+

Made in India

6gm, 8.5gm

---

Epoxy Based Root Canal Sealer

TECHNICAL & SAFETY INSTRUCTIONS FOR USE:

COMPOSITION : Epo Seal+ resin, amine hardening agents, zirconium oxide, filling component, plasticizing agent.
PROPERTIES: Epo Seal+ is produced as a dental kit: white paste and gray paste. Mixing of white and gray pastes, in equal proportions, forms plastic paste with film width of 5-10μm. Paste easily inserts into canal on gutta-percha points and isolates tooth root canals well. At room temperature 20-23°C paste keeps its plasticity during 4 hours.
Paste hardens in root canal within 24 hours and forms bioinert amino resin with good adhesion and low solubility. Overfilling material in apex area will not lead to any complications. Epo Seal+ is produced for using in aggressive
biological medium with the temperature range between 32°C and 42°C (in oral cavity at the temperature (37±1)°C and humidity 60-90 %).
INDICATIONS: Epo Seal+ is used for filling of tooth root canals with gutta-percha points.
CONTRAINDICATIONS: Drug idiosyncrasy, Do not misuse
SIDE EFFECTSAs far as all terms of storing, transporting and application are observed, there are no side effects
METHODS OF USE: Attention! Storing of material at the temperature lower than 20°C can be the reason of white
paste thickening (caused by viscosity growth in Epo Seal+ resin). Mix white and gray pastes on glass plate or mixing
pad with dry clean spatula at the weight ratio 1:1 till homogeneous consistency and color. Attention! Do not press
too hard when closing the tube. Clean tube nozzle before closing. Tightly close the tubes without changing of
caps: close gray tube with orange cap and white tube with white cap. Noncompliance of recommendations leads
to pastes hardening in tubes and insufficiency in application. Insert the paste into sterile and dried canal with
small portions using root needle or root canal filling instrument. Inserting and removing of paste with root canal filling instrument should be performed at low speed of rotation to avoid air bubbles in material. During filling with gutta-percha points, insert small amount of material into the canal and seal with points doped in paste. For condensation and obturation with hot gutta-percha it is recommended to use small amount of sealer for covering only the walls of canal. After filling of the canal make isolation and tooth crown restoration. Attention! Clean the
instruments and mixing pad with solvents after work (alcohol, acetate, chloroform).
STORAGE: Store at the temperature from 5°C to 25°C Tightly close container immediately after use. Do not use after expiry date.
Warning: Avoid prolonged or repeated contact with skin (allergic contact dermas), and eyes.
Avoid prolonged inhalaon. Do not take it internally. Contact with the skin may cause irritaon,
burns of hypersensivity. If contact with skin occurs immediately wipe off thoroughly with
coon and alcohol and then wash well with soap and water. If skin rash and sensizaon or other allergic reacon occurs disconnue use and seek medical aenon. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with paents who have a history of severe allergic reacon to any of the components.
Presentaon : 1 x 6 gm Base, 1 x 8.5 gm Catalyst(tube) Paste, 1 x Mixing Pad, Applicator Tips
Shelf life: 3 Years.