error

Adhesive Bond+ is a 7th Generation Self Etch Bond

india

5 ml


Product Description : Adhesive Bond+ is a 7th Generation Self Etch Bond combines the ingredients needed  
for etching, priming, and bonding into a single adhesive, thereby eliminating separate etching and priming  
steps of the bonding process. Adhesive Bond+ adhesive can be used for the bonding of both direct and  
indirect restorations. 
Composition : Hema Phosphate, Urethane Dimethacrylate, Triethylene Glycol imethacrylate, Bisphenol a  
Diglycidyl Methacrylate, 2-HydroxyEthyl Methacrylate, Water, Tertiary Butanol, Photoinitiators, Stabilizer. 
Indications: Direct Applications: 1.L 
ight-cured composite and compomer restorations. 2. Composite /ceramic/  
metal repairs. 3.C 
avity sealing for amalgam restorations. 4.L 
ight-cured or dual-cured core build-ups (always  
light-cure an incremental Build-up of core material). 
Indirect Applications : 1. Veneers 2. Porcelain, composite, and metal-based inlays, on lays, crowns, bridges. 3.  
Endodontic posts. 4. Cavity sealing as a retreatment for indirect restorations.  
Instructions for use : Bonding Composites/Compomers to Dentin/Enamel Veneers, crowns, bridges, inlays, on  
lays and metal-based restorations (used in conjunction with a luting cement) 1.  
Prepare  
cavity:  
Wash  
thoroughly with water spray and air dry (Do not desiccate). Note : For optimal adhesion, always prep (bevel)  
all enamel and/or margins prior to application of Adhesive Bond+. 2. Shake Adhesive Bond+ adhesive bottle  
briefly. Note : Upon first use, shake the adhesive bottle vigorously for 20 - 30 seconds. 3. Dispense 2-3 drops of  
Adhesive Bond+ adhesive into a clean well. Replace cap immediately after dispensing. 4. U 
sing the disposable  
applicator brush, apply a generous amount of adhesive to the enamel/dentin s 
urface. Scrub the surface with a  
brushing motion for 20 seconds. 5. A 
pply a second application of Adhesive Bond+ adhesive with a brushing  
motion for 20 seconds. 6. Dry the adhesive with gentle air first and then medium air for at least 5 seconds  
with oil-free air. 7. L 
ight cure for 20–30 seconds. 8. Apply composite according to manufacturer’s instructions  
for use. Instructions for bonding Indirect. 
Contraindications : 1. D 
o not use Adhesive Bond+ adhesive if a patient is known to be allergic to any of the  
materials ingredients or if the stipulated working technique cannot be used. 2. Adhesive Bond+ adhesive must  
not be used in conjunction with purely self curing composite materials. Dual curing materials must be light  
activated. 3. D 
o not use Adhesive Bond+ adhesive for direct pulp capping.  
Storage Conditions : Store at temperature between 10° to 24°C. Close the cap carefully after use. Keep away  
from moisture. Shelf life not affected after opening if stored in a cool dry place.  
Warning : Adhesive Bond+ adhesive is an irritant. Contact with the skin, mucous membranes or eyes should  
be avoided. If case of skin contact, immediately wash with soap and water. If the material should come into  
contact with the eyes, immediately rinse with copious amounts of water for at least 15 minutes and consult a  
physician or ophthalmologist. In rare cases, contact with the skin may lead to a sensitization towards  
methacrylates. Commercial medical gloves do not provide protection against the sensitizing effects of  
methacrylate. 
Disposal conditions : To be disposed off based on the prevailing rules of the country in which its used. 
Presentation : 1 x 5 ml, Plastic Dropper Bottles.  
Shelf Life : 3 years. from the date of manufacturing.