Adhesive bond is a 5th Generation Adhesive Bond
india
5 ml
Product Description : Adhesive bond is a 5th Generation Adhesive Bond combines the ingredients needed for
etching, priming, and bonding into a single adhesive, thereby eliminating separate etching and priming steps
of the bonding process. Adhesive bond adhesive can be used for the bonding of both direct and indirect
restorations.
Composition : Hema Phosphate, Urethane Dimethacrylate, Triethylene Glycol imethacrylate, Bisphenol A
Diglycidyl Methacrylate, 2-HydroxyEthyl Methacrylate, Water, Tertiary Butanol, Photoinitiators, Stabilizer.
Indications: Direct Applications: 1.Light-cured composite and compomer restorations. 2.Composite/ceramic/
metal repairs. 3.Cavity sealing for amalgam restorations. 4.Light-cured or dual-cured core build-ups (always
light-cure an incremental build-up of core material).
Indirect Applications:1. Veneers 2. Porcelain, composite, and metal-based Inlays, on lays, crowns, bridges.
3.Endodontic posts. 4. Cavity sealing as a retreatment for indirect restorations.
Instructions for use : Bonding Composites/Compomers to Dentin/Enamel Veneers, crowns, bridges, inlays, on
lays and metal-based restorations (used in conjunction with a luting cement) 1. Prepare cavity: Wash
thoroughly with water spray and air dry (Do not desiccate). Note : For optimal adhesion, always prep (bevel)
all enamel and/or margins prior to application of Hysbor Bond. 2. Shake Adhesive bond adhesive bottle briefly.
Note : Upon first use, shake the adhesive bottle vigorously for 20 - 30 seconds. 3. Dispense 2-3 drops of
Adhesive bond adhesive into a clean well. Replace cap immediately after dispensing. 4. Using the disposable
applicator brush, apply a generous amount of adhesive to the enamel/dentin surface. Scrub the surface with a
brushing motion for 20 seconds. 5. Apply a second application of Adhesive bond adhesive with a brushing
motion for 20 seconds. 6. Dry the adhesive with gentle air first and then medium air for at least 5 seconds
with oil-free air. 7. Light cure for 20–30 seconds. 8.Apply composite according to manufacturers instructions
for use. Instructions for bonding Indirect.
Contraindications : 1. Do not use Adhesive bond adhesive if a patient is known to be allergic to any of the
material. ingredients or if the stipulated working technique cannot be used. 2. Adhesive bond adhesive must
not be used in conjunction with purely self curing composite materials. Dualcuring materials must be light
activated. 3. Do not use Adhesive bond adhesive for direct pulp capping.
Storage Conditions : Store at temperature between 10° to 24°C. Close the cap carefully after use. Keep away
from moisture. Shelf life not affected after opening if stored in a cool dry place.
Disposal conditions : To be disposed off based on the prevailing rules of the country in which it is used.
Warning : Adhesive bond adhesive is an irritant. Contact with the skin, mucous membranes or eyes should be
avoided. If case of skin contact, immediately wash with soap and water. If the material should come into
contact with the eyes, immediately rinse with copious amounts of water for atleast 15 minutes and consult a
physician or ophthalmologist. In rare cases, contact with the skin may lead to a sensitization towards
methacrylates. Commercial medical gloves do not provide protection against the sensitizing effects of
methacrylate.
Presentation : 1 x 5 ml.
Shelf Life : 3 Years.